|
NO, Plow-Slick is NOT a silicone spray, graphite spray, Teflon® spray or plow wax but an advanced, 2-part, non-stick, slippery, polymer coating that cures on your snowplow. It will provide an unbelievably slick non-stick finish that will last an entire snowplowing season. |
Is Plow-Slick the same as silicone, Teflon® or Pam®? |
NO, not even
remotely close. Plow-Slick is
the ONLY one-time per season, non-stick, engineered snowplow coating on the market today! In fact, Plow-Slick is so slick and slippery, it will put any other snowplow paint or coating to shame! |
Why is Plow-Slick so slippery? |
Plow-Slick is extremely non-stick, slick
and slippery because it
chemically bonds to your snowplow and produces the hardest, slickest surface available. The finish is completely resistant to salt, snow, ice and grime and keeps your expensive plow working BETTER than new. |
Do you have to keep applying Plow-Slick? |
NO, because
Plow-Slick is an ultra-slick, industrial snowplow coating, only 1 application per plowing season is needed for incredible, non-stick performance! |
How long does it take to apply Plow-Slick? |
Plow-Slick only takes about 30 minutes
to apply on a clean plow
and then it needs to dry for 48 hours. After that, your plow will have a diamond-hard slippery finish that NO plow wax, silicon spray or Teflon® spray can provide. |
Can Plow-Slick be applied in cool temperatures? |
YES. once mixed, Plow-Slick will dry at
temperatures in the upper 30's and still give you the ultra-slick and slippery finish that you and your snowplow will love. This makes using Plow-Slick a very easy application that can be done in any garage. |
How is Plow-Slick applied? |
Plow-Slick can be brushed, rolled or
sprayed on your plow, dump box or truck bed. We mostly recommend using a non-shed 1/4" nap roller, and brush, to apply the super-slick coating. |
Do I need to spray any lubricants on the Plow-Slick coating? |
NO, actually snowplow lubricants can attract dirt and should NOT be used on
the super-slick, non-stick Plow-Slick coating. |
Can Plow-Slick be applied to my shovels? |
Absolutely, why not
make a hard job much easier? Plow-Slick is so slippery and non-stick that you will want to use it on every shovel you own. A one (1) plow kit will cover roughly 40 sq. ft. when rolled on and 60 sq. ft. when sprayed with a Wagner type sprayer. This is enough to to cover the front of your plow and generally a few shovels. |
Can I use Plow-Slick in my dump box? |
YES, Plow-Slick will repel snow, ice and
salt build-up. from your dump box and makes the metal completely resistant to the corrosive damage caused from salt. Plow-Slick has also been tested against corrosion from salt spray for over 5500 continuous hours with no signs of corrosion! |
Is Plow-Slick available in different colors? |
YES. Plow-Slick is available in
Safety-Red, Safety-Yellow and Clear. Custom colors are available for 10-Plow kit orders. How much should you order? 1-Plow Kit coverage: 60 sq. ft. if sprayed, and 40 sq. ft if rolled. 10-Plow Kit coverage: 600 sq. ft. if sprayed, and 450 sq. ft. if rolled. 1-Gallon Kit coverage: 600 sq. ft. if sprayed, and 450 sq. ft. if rolled. Again, Plow-Slick is NOT a wax, silicone or Teflon® spray but a new state-of-the-art, 2-part polymer snowplow coating that will outperform ANY other snowplow ice and snow repellent on the market today! |
PLOWBEFORE.jpg
Slick Coat LLC
154 E. Aurora Road, #219
Northfield Ohio 44067
Phone 877-604-2005
Sales@Slick-Coat.com
Copyright © 2024 Slick Coat LLC. All Right Reserved
Plow-Slick is a slick, snowplow coating not a silicone, Teflon, snow repellent or ice repellent. It is one of the best plow parts money can buy. Whether you have a Boss plows, Western plows, Meyers plows or any other snowplows or snow shovels, Plow-Slick is for you.